Table-Top Direct Heat Sealer

W-Series | SKU: W-300DAT(S)


  • Consistent seals each time

  • Easy to operate   

  • Strong 15mm seal width

  • Protector bars around sealing jaws

  • Seals a variety of thermoplastic materials

  • Equipped with a German manufactured temperature controller

  • PTFE coated jaws

  • Footswitch allowing hands free operation

W-300DAT(S) is a table-top direct heat sealer equipped with an electronic timer to control the sealing time.  Once the correct setting has been established, consistent seals will be maintained automatically.  This 12" sealer comes in ivory with a 15mm wide meshed or serrated jaws and a foot switch for a semi-automatic setting.  The hot sealing bars are enclosed with a heat resistant plastic bar for safer operation.

Direct heat sealers seal all types of thermoplastic packaging material, but are especially ideal for thicker material such as coated aluminum foil, Kraft paper, cellophane, mylar, coated PP.   Please note direct heat sealer cannot seal polyethylene materials.  Depending on the model of the sealer, material up to 16" wide and 20 mil thick can be sealed.  The meshed or serrated seal width is 15mm.  Equipped with a German manufactured temperature controller that accurately controls the temperature from 30°-550° F (0°-300° C).  Both jaws are heated simultaneously resulting in better heat penetration to seal thicker material.  Includes adjustable work table.

Easy to operate.  Set the temperature depending on the material to be sealed.  Once the correct setting has been reached, consistent seals will be maintained automatically. Insert the material between the two sealing bars.  Press down on the foot pedal and release.


Sealing Length12"12"
Seal Width15MM15MM
Seal TypeMeshedSerrated
Power110V / 350W110V / 350W
Temperature Range0 - 300°C / 30 - 550°F0 - 300°C / 30 - 550°F
Dimensions13" x 14" x 17"13" x 14" x 17"
Shipping Dimensions17" x 15" x 16"17" x 15" x 16"