Table-Top Direct Heat Sealer
W-Series | SKU: W-250DATVS
NEW: Vertical serrated seal lines
Consistent seals each time
Easy to operate
Strong 15mm seal width
Protector bars around sealing jaws
Seals a variety of thermoplastic materials
Equipped with a German manufactured temperature controller
PTFE coated jaws
Footswitch allowing hands free operation
Via special order
W-250DATVS is a table-top direct heat sealer equipped with an electronic timer to control the sealing time. Once the correct setting has been established, consistent seals will be maintained automatically. This 10" sealer comes in ivory with a 15mm wide vertical serrated jaws and a foot switch for a semi-automatic setting. The hot sealing bars are enclosed with a heat resistant plastic bar for safer operation.
Direct heat sealers seal all types of thermoplastic packaging material, but are especially ideal for thicker material such as coated aluminum foil, Kraft paper, cellophane, mylar, coated PP. Please note direct heat sealer cannot seal polyethylene materials. Depending on the model of the sealer, material up to 16" wide and 20 mil thick can be sealed. The vertical serrated seal width is 15mm. Equipped with a German manufactured temperature controller that accurately controls the temperature from 30°-550° F (0°-300° C). Both jaws are heated simultaneously resulting in better heat penetration to seal thicker material. Includes adjustable work table.
Easy to operate. Set the temperature depending on the material to be sealed. Once the correct setting has been reached, consistent seals will be maintained automatically. Insert the material between the two sealing bars. Press down on the foot pedal and release.
|Seal Type||Vertical Serrated|
|Power||110V / 350W|
|Temperature Range||0 - 300°C / 30 - 550°F|
|Dimensions||13" x 14" x 17"|
|Shipping Dimensions||17" x 15" x 16"|